Controller-less WLANs

What are the caveats while making configuration changes using Instant AP’s (IAP) command line interface (CLI)?

by on ‎06-27-2014 05:08 PM

Environment : This article applies to all the IAPs running OS version 6.2.1.0-3.3.0.0.

 

Some of the common limitations while configuring through IAP's command line on 6.2.1.0-3.3.0.0 are:

  • CLI does not support auto compete for “exit” and “end”, hence, these should be typed fully.
  • CLI commands containing user, management user - password should be typed fully before executing.
  • Uncommitted changes should not exceed 4Kb of size. Error is displayed if configuration exceeds 4kb data size.
  • Provisioning parameters for IAP cannot be configured through CLI.


For more information on "commit" option on IAP CLI, please search the below article

https://arubanetworkskb.secure.force.com/pkb/articles/FAQ/Can-we-make-configuration-changes-through-Aruba-Instant-IAP-command-line-Interface

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.