Controller-less WLANs

Which power setting has higher priority in IAP?

by ‎07-30-2015 04:25 AM - edited ‎07-30-2015 04:25 AM
Q:

In 4.2, the TX power settings can be configured in 3 ways like Static power settings on each IAP, ARM and in Radio profile.

Which power settings has higher priority in IAP?

 



A:

 

Priority is like mentioned below.

1)Static tx power per-ap

2)Radio profile on per-radio

3)ARM profile on all-radio

 

First the IAP will use static configuration. If there is no static power settings, it will assign it from Radio profile. If there is no static or Radio profile power settings configured, then it will assign power from ARM profile.

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.