Controllerless Networks

I am new to Aruba instant. Im checking that 6.2.0.0-3.2.0.2 is stable. Any issues ? Good to know this before I upgrade from 6.1.3.4 Is it safe to do this remotely IE not on site ?

Lots of people have read my post, but no one has responded ?

i have several cusstomers running 6.2.0.0-3.2.0.2_37229 and we have had no problems so far.  The SSH feature has been nice to have.  no problems using IE for the upgrade or doing it remotely.

awesome !

 

Thank you for taking the time to respond :)

I've had it in Lab since it came out - no issues from my end.

Just asked my local users and they also have no issues to report.

 

We're rolling it into pilot locations this month.

FYI..........3.3 should be out in a couple of weeks.  There are a couple of minor stability fixes in it plus some scalability enhancements.  You might want to evaluate it in your lab as well.

I always roll the "networking" lab the moment new code comes out, then the "IT" Lab - which includes the server and helpdesk teams - after I'm pretty sure I won't be breaking anyhing. If code runs there for 3-4 weeks, we roll to the live environment each quarter.

 

Keep those updates coming!

FYI, if you are running 6.2.0.0-3.2.0.2 we ran into an issue where the APs reboot one at a time causing an issue that will drive the users crazy. check out this post  http://community.arubanetworks.com/t5/Aruba-Instant/All-Aruba-Instant-APs-constant-rebooting/m-p/74560#M1846

and upgrade to 6.2.0.0-3.2.0.4 to get the fix.