Controllerless Networks

Reply
Contributor I

802.1X Fault Finding

We have taken over the management of a Ubiquiti wireless network and I am looking to replace the UniFi Pro access points with IAP103 access points with cloud management.  There is currently a corporate SSID utilising PEAP MSCHAPv2 and a guest SSID utilising an external captive portal.

 

My question is how do you fault find 802.1X associations when the access point is in Instant mode?  When you have a campus access point you can use the excellent show auth-tracebuff command but this command does not appear to be available when the access point is in Instant mode.

Community Administrator

Re: 802.1X Fault Finding

Try this, It may be what your looking for.

 

show ap debug auth-trace-buf

CWNA, ACMP, Security +
Contributor I

Re: 802.1X Fault Finding

Thanks for that Jamie.  I tested it and it worked AOK.  The only thing missing from the campus mode command is the count argument but I will just clear the log before each authentication test.

Community Administrator

Re: 802.1X Fault Finding

Yeah true. It loads up the CLI with entries. Glad to help.

CWNA, ACMP, Security +
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: