Controllerless Networks

Reply
Occasional Contributor II

AP-105 reset after firmware upgrade?

In Airwave is still showing AP-105's as "Applying Firmware Upgrade after 2 days?

11 A/N AND 11B/G/N Lights are Red on the AP' 105's?

 

 

Re: AP-105 reset after firmware upgrade?

Try to physically give them a reboot by unplugging at the switch.  I often find during an upgrade that there may be one or two APs that become stuck, and a reboot usually helps.

 

 


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
MVP

Re: AP-105 reset after firmware upgrade?

What version of Airwave?

 

We had that happen a few times some versions ago, but in 7.7.3 I pushed upgrades to 500+ iAP in 34 swarms with no stuck devices, and only one swarm which had to try the job a second time.

 

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: