Controllerless Networks

Reply
Occasional Contributor I

AP-205H not booting as instant device

I've got a brand new AP-205H, plug it to a PoE+ switch (switch is just for powering it up) and it never boots up.

The "instant" ESSID is never announced (I left it plugged to the switch for over 1 hour) and the System Status LED stays blinking in green color at a slow frequency (2 times per second)

 

The PSE LED stays off.

 

I've tried the factory reset but it doesn't make any difference.

 

Thanks

 

 

Guru Elite

Re: AP-205H not booting as instant device

Is it an AP-205H or an IAP-205H?

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I

Re: AP-205H not booting as instant device

AP-205 as per sticker on the back side.

So, it does NOT support Instant?
Guru Elite

Re: AP-205H not booting as instant device

That's correct.



IAP-205H = Instant (can be converted to controller-based)

AP-205H = controller-based only

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I

Re: AP-205H not booting as instant device

I see.

Thanks a lot.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: