Controllerless Networks

Reply
Contributor II

Access Point Missing

My AP's tend to dissappear when i update them in AirWave. If i go to the AP/Devices tab in airwave then hover over an AP and click manage it takes me to the Intstant config page. on this page i can modify each ap with static ip's and device names. once i hit save and apply all, the ap's update but disappear from the AP list. If i go back to the AP/Device tab they are all there with the changes i made and im able to connect to them but if i go back to the instant config tab and click access points they are missing. Only the virtual controllers are listed. i usually have to wait hours before they reappear. how can i fix this issue?

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: