Controllerless Networks

Hi, how do I get to 205H UI to change options of the new SSID I've created moment ago? Thanks.

You need to web into the same GUI....

Hi Colin,

But how do I get to GUI, please? Typing http://instant.arubanetworks.com doesn’t work. During SSID set-up I have furthermore added captive portal. So when I switch on Wi-Fi on my laptop and connect to my new SSID, default captive portal appears (see attached print screen). BUT when I click on "Accept” button, web page redirects to https://securelogin.arubanetworks.com/swarm.cgi which is a blank page. That’s why I need to get to UI and cancel that captive portal option.

I also cannot reset AP to factory settings because I don’t have a console cable and couldn’t find any other option. 

Thank you for your help.

 

Jaroslav

 

You can reset using the reset button:  http://community.arubanetworks.com/t5/Controller-less-WLANs/Where-is-the-reset-button-on-the-IAP-and-how-do-I-reset-the-IAP/ta-p/180980

 

If you mean button circuled in red in attached picture, that doesnt work unfortunatelly. There is no web address like 192.168.1.1 thru which I can access UI? It already took me 3 hours to figure out how to access UI :(

Thank you.

Jaroslav

The instant device comes with instructions o how to access the webui.  Also, the reset button should work with the instructions at the link I sent.

The hardware installation Guide for the 205H is here:  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=17574

 

The instant quickstart guide is here:  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=18362

 

Instant user guide:  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=18858

 

Lastly, the Knowledgebase, just in case you have to find things:  http://community.arubanetworks.com/t5/Support/ct-p/Support-Documentation-Downloads

 

The reset button should work with the instructions I gave you.  If you have access to the GUI please note the ip address of the instant Virtual Controller.  Users who just login to the captive portal are not supposed to know what the ip address is, that is why it does not appear anywhere...

Also are you accessing the UI through the default "instant" SSID that should be broadcasting in factory default?

Sent from my iPhone

Hi,

 

You can access the GUI by entering the VC IP or master AP IP in a web browser.

 

Regards,

Julián