I have opened a TAC case and I have been told that in the remote building the where we have IAP-204 - HP Switch - IAP-205 is not supported.
I can plug a device into the remote HP switch and get an IP address fine, the IAP-205 also gets an address but something weird happens with the election / PAPI traffic and the IAP-205 does not come up.
For clarity this is how we tried to set the network up.
Building 1 Building 2
IAP-205
|
|
DHCP Server ---|Switch|---IAP-204| - Bridge Link - |IAP 204---|Switch|---IAP-205
I tested this using some IAP-104’s, IAP-105’s and a IAP-225 and Instant OS version and it works.
What we are going to do is use the IAP-205 in stand alone mode and copy the SSID etc. from the main network.