Controllerless Networks

Hello everyone, i just got 3 IAP's setup in my environment and attempted to update the firmware only to be met by "Received no response from server" , my certificate expires Aug 11 of 2017; i saw in another thread if this was expired it wouldnt work. 

I can SSH into the IAP's and ping google with no issue, but i still cant reach out for updates. 

Current version is 6.4.2.0-4.1.1.0_46028 , they are all IAP 205's 

You cannot see the certificate that has expired.  I just sent you a link.

Awesome! Yea that firmware did the trick, and i can now reach the update server where it says no update. 

I have the same problem too, i connect for SSH to de iap, and from iap ping to internet, but when i check firmware "no response from server"

What version of Firmware are you running?  As a possible fix to your problem, you can upgrade to the version here:  http://support.arubanetworks.com/LifetimeWarrantySoftware/tabid/121/DMXModule/661/EntryId/21998/Default.aspx

i Have two models in my network the iap 105 and the iap 103, is the same firmware?

No.  Please look at the diagram here:

105 is Orion and 103 is Pegasus.

thanks!!, but how can i upload the firmware from a file?, in the url can i put a ftp internal address?

Yes, you need to have an ftp internal address for both.  It must be an anonymous ftp with no username and password.  A  tftp server might be easier, because it doesn't use a password.  Use the format:

ftp://xx.xx.xx.xx/ArubaInstant....

tftp://xx.xx.xx.xx/ArubaInstant....

I have the same problem. I succesfully manually updated the access points to the most current software, 6.4.4.0-4.2.3, but the virtual controller still cannot access the update server for some reason. Checked the firewall, I don't think the problem is there,  So what else should I check?

Thanks!

David

I understand that, but why would the update server not respond at all?

Thanks -

David

That is a good question.  Can you even ping device.arubanetworks.com?

This is from the master, connecting through the virtual controller IP.

84:d4:7e:c3:80:8e Sales# ping device.arubanetworks.com
Press 'q' to abort.
PING device.arubanetworks.com (104.36.249.201): 56 data bytes
64 bytes from 104.36.249.201: icmp_seq=0 ttl=49 time=54.0 ms
64 bytes from 104.36.249.201: icmp_seq=1 ttl=49 time=54.3 ms
64 bytes from 104.36.249.201: icmp_seq=2 ttl=49 time=54.0 ms
64 bytes from 104.36.249.201: icmp_seq=3 ttl=49 time=54.0 ms
64 bytes from 104.36.249.201: icmp_seq=4 ttl=49 time=54.0 ms

--- device.arubanetworks.com ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 54.0/54.0/54.3 ms
84:d4:7e:c3:80:8e Sales#

I would open a tac case if you are really concerned about that.

Hello there 

could you help meow pls too.  I have two aruba aipn215 access point that i use inside my house.  instant virtual controller shows that the firmware running is 8.4.0.5_72830.   I am also getting "received no response from server" when i click the check for new firmware button.   do I need a new certificate uploaded  if yes where can i get that?  thanks

Hi

I've got this build but the exact same problem.
6.4.2.0-4.1.1.0_45444
I didn't get the solution though.

Thanks

PS: 215 IAPs

Same here please help