Hello everyone,
We are having problems setting up our IAP-215s on our new Avaya Ethernet Routing Switch 4800 switches. We have successfully configured Instant on the first IAP-215 we installed, but there seems to be a problem with the broadcast traffic when we try to connect another IAP-215 on the same switch. The second IAP-215 can't join the cluster and tries to initialize a master election on its own. We have tried the same scenario with our older Nortel switches and it worked instantly, so we are guessing there is a feature on the Avaya switches that needs to be enabled/disabled. We have checked for Storm Control and Rate Limiting features and they seem to be disabled on the Avaya switches.
Here are the logs I have gathered with the console port on the problematic IAP-215:
Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
[ 0.000000] Flash variant: variant0
[ 0.000000]
[ 0.000000] Aruba Networks
[ 0.000000] ArubaOS Version 6.4.2.0-4.1.1.0 (build 45444 / label #45444)
[ 0.000000] Built by p4build@cartman on 2014-08-15 at 22:19:51 PDT (gcc version 4.5.1)
[ 0.000000]
[ 0.000000] P1010 RDB board from Freescale Semiconductor
[ 0.000000] Memory: 246716k/262144k available (12184k kernel code, 15428k reserved, 504k data, 358k bss, 8792k init)
[ 0.001491] Brought up 1 CPUs
[ 0.077631] PCI: Probing PCI hardware
[ 0.120682] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.183587] pci 0001:02:00.0: PCI bridge to [bus 03-ff]
[ 0.245811] pci 0000:00:00.0: not setting up bridge for bus 0000:01
[ 0.320382] pci 0001:02:00.0: not setting up bridge for bus 0001:03
[ 6.321852] fsl-ifc ffe1e000.ifc: Freescale Integrated Flash Controller
[ 6.426686] Kprobe smoke test started
[ 6.476615] Kprobe smoke test passed successfully
[ 6.640211] ee000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank
[ 6.715313] Amd/Fujitsu Extended Query Table at 0x0040
[ 6.776802] number of CFI chips: 1
[ 6.821190] fsl-gianfar ethernet.2: enabled errata workarounds, flags: 0x4
[ 6.903552] gfar_probe: Renaming interface to bond0
[ 6.962314] /proc/gfar_bond0_stats created
[ 7.024537] Enabling watchdog on CPU 0
[ 7.073485] Disabled fips elf aesccm selftest
[ 7.125647]
[ 7.125651] Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
[ 7.217403] Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT
[ 7.307237] Starting Kernel DES KAT ...Completed Kernel DES KAT
[ 7.379191] Starting Kernel AES KAT ...Completed Kernel AES KAT
[ 7.422986]
[ 7.468849] Starting Kernel HMAC SHA1 FIPS KAT ...Completed Kernel HMAC SHA1 FIPS KAT
[ 7.564132] Starting Kernel HMAC SHA256 FIPS KAT ...Completed Kernel HMAC SHA256 FIPS KAT
[ 7.667387] Starting Kernel HMAC SHA384 FIPS KAT ...Completed Kernel HMAC SHA384 FIPS KAT
[ 7.771623] Starting Kernel HMAC SHA512 FIPS KAT ...Completed Kernel HMAC SHA512 FIPS KAT
[ 7.875849] Starting Kernel AES-CBC FIPS KAT ...Completed Kernel AES-CBC FIPS KAT
[ 7.973324] Starting Kernel 3DES-CBC FIPS KAT ...Completed Kernel 3DES-CBC FIPS KAT
Domain Name: instant.arubanetworks.com
No panic info available
apfcutil: sector CACHE: Cache uninitialized
apfcutil: sector RAP: Cache uninitialized
apfcutil: sector FAT: Cache uninitialized
apfcutil: sector SCRATCH: Cache uninitialized
Check backup ENV.
apfcutil: sector MESH Prov: Cache uninitialized
Cfg len is 0
Configuration file is empty, turning on default services...
extended ssid activate due to no AP config ...
[ 16.778024] ADDRCONF(NETDEV_UP): bond0: link is not ready
Ethernet uplink not active yet
[ 22.793903] PHY: bond0 (mdio@ffe24000:00) - Link is Up - 1000/Full
[ 22.868399] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
Mesh is DISABLED on this device.
[ 23.149580] AP xml model 84, num_radios 2 (jiffies 11402)
[ 23.214200] init_asap_mod: installation:0
[ 23.262185] radio 0: band 1 ant 0 max_ssid 16
[ 23.314311] radio 1: band 0 ant 0 max_ssid 16
[ 23.366437] election init: rand=17 HZ=500
[ 23.414379] IAP client match init
notify asap_mod 3g no present...
Starting watchdog process...
Getting an IP address...
Dec 31 16:00:23 udhcpc[2009]: udhcpc (v0.9.9-pre) started
Dec 31 16:00:23 udhcpc[2009]: send_discover: pkt num 0, secs 0
Dec 31 16:00:23 udhcpc[2009]: Sending discover...
Dec 31 16:00:25 udhcpc[2009]: send_discover: pkt num 1, secs 2
Dec 31 16:00:25 udhcpc[2009]: Sending discover...
Dec 31 16:00:27 udhcpc[2009]: send_discover: pkt num 2, secs 4
Dec 31 16:00:27 udhcpc[2009]: Sending discover...
[ 29.021517] Enabling USB power
Dec 31 16:00:29 udhcpc[2009]: No lease, forking to background.
Dec 31 16:00:49 udhcpc[2114]: send_discover: pkt num 0, secs 26
Dec 31 16:00:49 udhcpc[2114]: Sending discover...
Dec 31 16:00:51 udhcpc[2114]: send_discover: pkt num 1, secs 28
Dec 31 16:00:51 udhcpc[2114]: Sending discover...
Dec 31 16:00:53 udhcpc[2114]: send_discover: pkt num 2, secs 30
Dec 31 16:00:53 udhcpc[2114]: Sending discover...
Dec 31 16:00:53 udhcpc[2114]: send_selecting: pkt num 0, secs 30
Dec 31 16:00:53 udhcpc[2114]: Sending select for 10.3.0.101...
Dec 31 16:00:53 udhcpc[2114]: Lease of 10.3.0.101 obtained, lease time 691200
Dec 31 16:00:53 udhcpc[2114]: DHCP OPT 60 is not ArubaAP
Dec 31 16:00:53 udhcpc[2114]: DHCP OPT 60 is ArubaInstantAP
Dec 31 16:00:53 udhcpc[2114]: DHCP OPT 43, len: 44, buf: AP_Administration,10.2.0.154,***********
Dec 31 16:00:53 udhcpc[2114]: ams-ip: 10.2.0.154, ams-key:**************
[ 54.477344] ip_time_handler: Got ip and packets on bond0 Started master election 25-0, rand 22
10.3.0.101 255.255.252.0 10.3.0.1
Compressing all files in the /etc/httpd directory...
[ 55.312109] Adding bridge entry for magic vlan GW, ifindex 8450, ac:a3:1e:c5:93:ee
[ 55.402784] (00:00:55) !!! Init ---> Slave
Done.
Starting Webserver
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
Launching NTP Client on pool.ntp.org
[ 58.839617] wifi0: AP type AP-215, radio 0, max_bssids 16
[ 58.947489] wifi1: AP type AP-215, radio 1, max_bssids 16
shutting down watchdog process (nanny will restart it)...
Completed SW FIPS KAT test
<<<<< Welcome to the Access Point >>>>>
User: [ 89.329869] asap_send_elected_master: sent successfully
[ 89.409582] wait for stm to initialize over
[ 89.459635] asap_send_elected_master: sent successfully
[ 89.542672] process `snmpd_sap' is using obsolete setsockopt SO_BSDCOMPAT
Has anyone tried this combination of Avaya ERS 4800 switches and Aruba IAPs?
Many thanks for your help.