Controllerless Networks

Reply
New Contributor

Aruba Instant LACP configuration

Is there any documentation for configuring LACP in an Aruba Instant environment? Most of what I've found relates to Aruba OS.

 

I have an IAP-325 that I would like to use both ethernet ports for increased throughput. It is connected to an Aruba/HP 2920-48G-POE+ Switch. The wifi traffic is vlaned, all on the same subnet. 

 

I ran the LACP -enable on the AP, however, I 'm not sure what else needs to be configured on the master AP in the cluster and or switch. 

 

 

 

Re: Aruba Instant LACP configuration

https://www.arubanetworks.com/techdocs/Instant_83_WebHelp/Web_Help_Index.htm#Instant_UG/Wired_port_profile/lacp_support.htm?Highlight=lacp 

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II

Re: Aruba Instant LACP configuration

What is the best practise process of applying  LACP on IAP 325 in aruba central. 

I currently configured my switch with command

trunk 3,4 trk1 lacp

and linked my IAP to it, am I missing any command to back it up?

Occasional Contributor II

Re: Aruba Instant LACP configuration

Is striping IP required for IAP running in aruba central?

Guru Elite

Re: Aruba Instant LACP configuration

It is not.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Occasional Contributor II

Re: Aruba Instant LACP configuration

What about the best practise to setup an LACP port on a switch for IAP?

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: