Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

CLI for IAP-105%0D%0A

This thread has been viewed 0 times

  • 1.  CLI for IAP-105%0D%0A

    Posted Feb 03, 2014 08:57 AM

    Hi, I have an Aruba IAP-105 deployment of 4 installed

    I wanted to know if there is a CLI interface to get into it?  putty/ssh?

    and if there is a cli manual/pdf?

    Here are some things I wanted to do

    1. the Guest SSID - we want to limit time restrictions - 9-5pm 

    2. through a "GPO" or something, remap all users wireless SSID from the old one to the new Aruba SSIDs...not sure if this is possible...but wanted advise.

     

     

     

    Thanks,

     



  • 2.  RE: CLI for IAP-105%0D%0A

    Posted Feb 03, 2014 09:37 AM

    There is a CLI for access via the console and SSH access. SSH was added, and Telnet removed,  in more recent versions of SW.

     

    In the IAP WebUI go to System -> Terminal Access and make sure it is enabled.

     

    There is an IAP CLI Reference Guide available for download on the Support site under Documentation: Click here

     

    You can disable an SSID, without turning off the AP, however, IAP currently does not support time-based rules.  You can use AirWave to do this by creating two configs -- one with the SSID enabled and one with the SSID disabled then have AirWave push the configs automatically.