Controllerless Networks

Reply
Occasional Contributor I
Posts: 6
Registered: ‎06-10-2015

Can I use Virtual Controller ip as Radius client address?

Hi

I have set up an Instant AP as a Virtual Controller, and given the Controller a static ip. I then set up an SSID with 801.1x auth, using one of our DCs as a Radius server.

This is all working, except that the Auth request originates from the ip address of the AP, not the address of the Virtual controller.

This suggests that I will have to set up a Client on the Radius server for each AP.

Is there a way of using one Radius Client address for the whole Wireless network?

 

Many Thanks

Adrian

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: Can I use Virtual Controller ip as Radius client address?

Please enable Dynamic Radius Proxy , under System so it can use the VC IP address
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Guru Elite
Posts: 8,645
Registered: ‎09-08-2010

Re: Can I use Virtual Controller ip as Radius client address?

Enable Dynamic RADIUS proxy. (DRP)

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I
Posts: 6
Registered: ‎06-10-2015

Re: Can I use Virtual Controller ip as Radius client address?

[ Edited ]

Thanks Victor and Tim, I had played with that in the SSID, but not enabled it under System. All working now, many thanks for the quick responses.

Adrian

Search Airheads
Showing results for 
Search instead for 
Did you mean: