Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Can an IAP-275 use 802.3at? Radios not coming up

This thread has been viewed 0 times

  • 1.  Can an IAP-275 use 802.3at? Radios not coming up

    Posted Sep 16, 2014 09:47 AM

    Can an IAP-275 be powerd by 802.3at or does it need a special injector? The radios will not come up on this one. Here is the output from the CLI "Shutting down radios due to insufficient POE voltage [power profile 2]"

     

    Looking at the switch port the IPA is drawing 15.4 watts 



  • 2.  RE: Can an IAP-275 use 802.3at? Radios not coming up

    Posted Sep 16, 2014 09:52 AM
    Can you enable LLDP on your switch port and see if that helps?


  • 3.  RE: Can an IAP-275 use 802.3at? Radios not coming up

    Posted Sep 16, 2014 10:12 AM

    The AP-275 does need 802.3at.   No special adapter is required.

     

    What switch are you using?



  • 4.  RE: Can an IAP-275 use 802.3at? Radios not coming up
    Best Answer

    Posted Sep 16, 2014 10:47 AM

    Enabling LLDP on the 2960-S-24PS did the trick. Thank you very much for the quick responses.

     

     



  • 5.  RE: Can an IAP-275 use 802.3at? Radios not coming up

    Posted Sep 16, 2014 10:46 AM

    That did it.... thanks. Hmm, bet you can't tell I come from a Cisco/CDP world...