Controllerless Networks

Reply
Occasional Contributor II
Posts: 15
Registered: ‎09-16-2014

Can an IAP-275 use 802.3at? Radios not coming up

Can an IAP-275 be powerd by 802.3at or does it need a special injector? The radios will not come up on this one. Here is the output from the CLI "Shutting down radios due to insufficient POE voltage [power profile 2]"

 

Looking at the switch port the IPA is drawing 15.4 watts 

Aruba Employee
Posts: 664
Registered: ‎04-15-2009

Re: Can an IAP-275 use 802.3at? Radios not coming up

Can you enable LLDP on your switch port and see if that helps?
Moderator
Posts: 681
Registered: ‎04-16-2009

Re: Can an IAP-275 use 802.3at? Radios not coming up

The AP-275 does need 802.3at.   No special adapter is required.

 

What switch are you using?

Occasional Contributor II
Posts: 15
Registered: ‎09-16-2014

Re: Can an IAP-275 use 802.3at? Radios not coming up

That did it.... thanks. Hmm, bet you can't tell I come from a Cisco/CDP world... 

 

Occasional Contributor II
Posts: 15
Registered: ‎09-16-2014

Re: Can an IAP-275 use 802.3at? Radios not coming up

Enabling LLDP on the 2960-S-24PS did the trick. Thank you very much for the quick responses.

 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: