Controllerless Networks

Reply
Super Contributor II

Change from PAP when using RADIUS for management

Hi!

 

I'm setting up my IAP to use an external radius server for authenticating administrators. Although I can't find any way to change from PAP to encrypted protocols. Anyone know if it's possible and in that case where it's configured?

 

Best regards,

Chris

Christoffer Jacobsson | Aranya AB
Aruba Partner Ambassador
Aruba: ACMX #537 ACCP | CWNP: CWNA CWDP CWSP CWAP
Guru Elite

Re: Change from PAP when using RADIUS for management

Only the pap-based method is supported for management authentication to a radius server on Aruba Instant:  https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-1320

 

The password is encrypted with the Radius Preshared key all the way to the Radius Server.  That is the single biggest determining factor of how secure your information is.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************

Re: Change from PAP when using RADIUS for management

In the version of InstantOS 4.1 you can use TACACS
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: Change from PAP when using RADIUS for management

 
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Super Contributor II

Re: Change from PAP when using RADIUS for management

Thanx for the quick replies!

Christoffer Jacobsson | Aranya AB
Aruba Partner Ambassador
Aruba: ACMX #537 ACCP | CWNP: CWNA CWDP CWSP CWAP
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: