Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Changing Channel

This thread has been viewed 4 times

  • 1.  Changing Channel

    Posted Aug 19, 2015 10:42 AM

    I'm experiencing noisy channel, how can I change to another channel on 2.4 and 5 bands. I have IAP-225.


    #AP225


  • 2.  RE: Changing Channel

    Posted Aug 19, 2015 01:11 PM

    If you do not want to use ARM you can edit the Access Point.  Choose the "Radio" tab and select Administrator assigned.  From there you can choose which channel you wish to use.



  • 3.  RE: Changing Channel

    Posted Aug 21, 2015 02:44 AM

    There is another possibility, if you want to continue to use ARM for the auto-assignment of your channels, but if you want to change the available channels. In this case you have to go to "RF" link from the GUI interface and set the valid channels under the parameter "Customize Valid Channels": here you can remove the undesired channels and add new channels.

     

     

    [If you found my post helpful, please give kudos]