Controllerless Networks

Reply
Occasional Contributor I

Clear Client on IAP 325 : clear client <mac>

I am tying to clear some clients on IAP325 that have 0.0.0.0 IP addresses.

Aruba Instant 6.4.4.6-4.2.4.0 Command-Line Interface Guide show commands to be:

clear

ap <ip-address>

arp <ip-address>

client <mac>

 

On th IAP I do not see the option to clear users.

All I see is:

IAP2# clear ?
airgroup
ap-env-backup
ap-env-current
arp                Address Resolution Protocol
captive-portal     Enable Captive Portal
core-file
datapath           Datapath information
debug              Debugging information

 

How can  I clear clients from CLI ?

Thanks.

 

 

 

 

Re: Clear Client on IAP 325 : clear client <mac>

I guess the command doesn't exist. You can log it as a feature request here.

 

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Guru Elite

Re: Clear Client on IAP 325 : clear client <mac>

disconnect-user

http://www.arubanetworks.com/techdocs/Instant_423_WebHelp/InstantWebHelp.htm#CLI_commands/disconnect_user.htm?Highlight=disconnect-user

disconnect-user.png



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: