Controllerless Networks

Reply
Occasional Contributor II

Clearpass VM IP issue

Running Clearpass 6.7.3

VM is running on Hyper-V 2012.

 

Issue is after i configure the ip and the machine reboots it looses the ip config.

i have 2 nics one is disabled.

 

Any thoughts?

Occasional Contributor II

Re: Clearpass VM IP issue

Can you have both the NIC's enabled, Just to ensure that we are configuring the IP on the right NIC. 

Occasional Contributor II

Re: Clearpass VM IP issue

i have just changed the NIC setting and still the same issue

Occasional Contributor II

Re: Clearpass VM IP issue

Just referring to "Installing or Upgrading to 6.7 on a Virtual Appliance" technote.

 

Supported Hyper-V Versions
The following Microsoft Hyper-V versions are supported:
Microsoft Hyper-V Server 2012 R2
Microsoft Hyper-V Server 2016
Windows Server 2012 R2 with Hyper-V
Windows Server 2016 with Hyper-V

 

Ensure that you bring up fresh ClearPass 6.7.0 installs with the network adapter type "Network adapter" instead of
the legacy option.

 

Occasional Contributor II

Re: Clearpass VM IP issue

i have both NIC as network adapter.

its a fresh built box we did not upgrade it.

Server 2012R2 standard

Highlighted
Contributor II

Re: Clearpass VM IP issue

Hi,

 

Can you check if the have a static MAC address assigned to the VM? Hyper-V will do a dynamic MAC address by default sometimes. Changing the mac address on a linux based VM might cause issues.

 

 

Cheers, Frank
Aruba Partner Ambassador| AMFX#22| ACCX#613| ACMX#733| ACDX#744
Occasional Contributor II

Re: Clearpass VM IP issue

it has dynamic mac address .

do you want me to change it to static?

Contributor II

Re: Clearpass VM IP issue

Yes and then check again if IP address is being removed.
Cheers, Frank
Aruba Partner Ambassador| AMFX#22| ACCX#613| ACMX#733| ACDX#744
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: