Controllerless Networks

Reply
Occasional Contributor II

Client Match

Hello,

I have a situation where clients keep bunching up on a particular AP even when it's not the closest one. I have attached my RF settings. My configuration says Client Match is enabled. Is there anything else I need to change?

APs.JPGRF.JPG

Guru Elite

Re: Client Match

Lower the Max Transmit power to 18 and the min transmit power to 12.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: