Controllerless Networks

Reply
Frequent Contributor II
Posts: 184
Registered: ‎04-17-2013

Client filover on redundant ISP

Hi,

We have instant 225 with 2 SSID configured on each IAP. Can we do ISP failover for single SSID through IAP. Our L2/L3 switch could not capable for failover.

Instant PBR.png

Guru Elite
Posts: 21,499
Registered: ‎03-29-2007

Re: Client filover on redundant ISP

You would only be able to do this for a Virtual Controller assigned VLAN, because all of the traffic would go through the VC (Master IAP), and uplink management can really only be done on the VC if you want the traffic to be managed at only one point.  Please see here: http://www.arubanetworks.com/techdocs/Instant_423_WebHelp/InstantWebHelp.htm#UG_files/Uplink_conf/Uplink Interface Configuration.htm%3FTocPath%3DUG%2520topics%7CUplink%2520Configuration%7C_____1



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: