Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Client info on Instant APs

This thread has been viewed 0 times

  • 1.  Client info on Instant APs

    Posted May 22, 2014 01:39 PM

    Finally getting around to testing my IAP units.   We wanted to test 802.11ac, and have deployed an AP-225.  

     

    How can I see if the clients are connecting at AC, or some other rate?  I see the type is AN, but I guess they want to know if they are connecting at full AC so they can test the throughput and range.



  • 2.  RE: Client info on Instant APs

    EMPLOYEE
    Posted May 22, 2014 01:43 PM
    Show ap association from the CLI.


  • 3.  RE: Client info on Instant APs
    Best Answer

    Posted May 22, 2014 01:44 PM

    In the WebUI you can expand the Clients pane:

     

     

    iap-ac.jpg

     

    Same box but expanded so you can actually see what I was referring to...

     

    iap-2.jpg

     

    And here is the "show ap association" command Cappalli pointed out.   The client I circled above is the same client below and is a Galaxy S4.  The nice thing about "show ap association" is you can see the number of Spatial Streams of the client.

     

    iap3.jpg

     

    Expanded....

     

    iap4.jpg