Controllerless Networks

Reply
Occasional Contributor II

Clustering

Can someone please explain clustering to me and how it works?  I don't see anything in Aruba Central that deals with a "Cluster".

Basically I have 10 IAPs that will be deployed in our main HQ on VLAN1 (172.16.0.0/16).  Each SSID will have a different VLAN (100, 110, 120, etc...) and the networks and switching side have already been built, configured and they're working fine. 

At each remote site will be 2 or 3 IAPs that will use the same SSIDs, but will be on a different network (192.168.xxx.0/24).  I was told I need to build out different clusters for each site, but I have no idea how to do this... can someone please help?

 

Thanks

Guru Elite

Re: Clustering

Please see all of the videos here:  https://www.youtube.com/playlist?list=PL37Y-XxK6oanTV3821XpKHFVo3hGPW-56

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor

Re: Clustering

IAP Cluster:

All IAPs in same layer 2 domain will automtically join a group known as cluster. 

 

Plug in the first IAP and configure it (Master IAP).

Add the remaining IAPs in the same layer 2 domain (Slave IAPs).

The configuration will be synched from Master IAP to Slave IAPs 

 

Repeat the same procedure for remote site where you have 2-3 IAPs

Refer to the video link posted by "cjoseph" above