Hello,
I am wondering if anyone can tell me what the command line is for the IAP's when SSH into an AP for DNS lookup is please.
Thank you
Just ping the name:
IAP-335# ping www.yahoo.com Press 'q' to abort. PING fd-fp3.wg1.b.yahoo.com (98.138.252.30): 56 data bytes 64 bytes from 98.138.252.30: icmp_seq=0 ttl=47 time=37.6 ms 64 bytes from 98.138.252.30: icmp_seq=1 ttl=47 time=37.6 ms 64 bytes from 98.138.252.30: icmp_seq=2 ttl=47 time=37.5 ms 64 bytes from 98.138.252.30: icmp_seq=3 ttl=47 time=37.6 ms 64 bytes from 98.138.252.30: icmp_seq=4 ttl=47 time=37.6 ms
Hi Colin
Thanks I did that and it worked however I ran into an issue where i could ping the host but not lookup pool.ntp.org so is wanted to know if there was a command from the AP that I could use for TShoot. Thanks
Joseph
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.