Controllerless Networks

Reply
ryh
Occasional Contributor II

Commands to enable an SSID on only 1 IAP in a cluster?

I am trying to find a way to broadcast a special SSID on only 1 of our IAPs in a cluster.  This is for ease of district-wide device provisioning.

 

The SSID is globally defined, but disabled.  Now I need to enable it on select IAPs, or just this one IAP.

 

I was looking through the IAP CLI command guide, but I don't see an option for a per-AP configuration piece to be applied for SSID.

 

I am running 6.5.2.1.

 

Any thoughts?

Highlighted

Re: Commands to enable an SSID on only 1 IAP in a cluster?

Have you tried the zone feature? This will allow you to assign a SSID to a specific IAP.

 

http://www.arubanetworks.com/techdocs/Instant_41_Mobile/Advanced/Content/UG_files/CustomizeIAPParams/Conf_zone_settings.htm

ACMA, ACMP
If my post addresses your query, give kudos:)
ryh
Occasional Contributor II

Re: Commands to enable an SSID on only 1 IAP in a cluster?

That was exactly what I needed.

In short:
In the SSID for which I only want in one area, I set the zone for that SSID, and I place that IAP in that zone.
The IAP will broadcast the special Zone-only SSID, as well as the SSID's that aren't zone-specific (i.e. normal, global, SSIDs we're used to).

Great quick reply!

Re: Commands to enable an SSID on only 1 IAP in a cluster?

Glad to help :)

 

 

ACMA, ACMP
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: