Controllerless Networks

Reply
Occasional Contributor I
Posts: 5
Registered: ‎02-08-2011

Config parameters for AT&T 313u on RAP155 in instant mode.

Tried the settings listed in the FAQ: https://arubanetworkskb.secure.force.com/pkb/articles/FAQ/What-are-the-4G-provisioning-parameters-for-AT-T-313u-Sierra-Wireless-modem

 

Also received different settings from TAC:

 

usb_dev=0x0f3d68aa usb_type = sierra-net usb_init = 3,broadband


In either case, the modem is detected with no link. It works properly with rap mode.

Guru Elite
Posts: 8,792
Registered: ‎09-08-2010

Re: Config parameters for AT&T 313u on RAP155 in instant mode.

[ Edited ]

Try this:

 

usb_type=4 usb_dev=0x0f3d68a3 usb-dial=ATDT*99***1# usb_tty=ttyUSB3 usb_init=AT+CGDCONT=1,'IP','isp.cingular'


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I
Posts: 5
Registered: ‎02-08-2011

Re: Config parameters for AT&T 313u on RAP155 in instant mode.

Thanks, trying to do it via the instant CLI. Central doesn't allow quotes, and I've tried escape characters in different positions.

Search Airheads
Showing results for 
Search instead for 
Did you mean: