Controllerless Networks

Reply
Occasional Contributor I
Posts: 6
Registered: ‎01-19-2017

Configure 2 Networks over 2 Ethernet Network Cards on ARUBA 235 AP

Hello,

i wanted to Configure 2 SSIDs, using both ethernet network cards on the AP. Every networkcard has its own IP Segment and a IP-address from 2 differend DHCP Servers. One SSID is for company access, the other for guest access. How can i configure a new SSID which uses just one network card on the AP?

I could configure the switchports in the "Tagged" mode, so the APs could funciton as DHCP Server.

 

Thanks!

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: