Controllerless Networks

Reply

Configure Aruba Instant and Airwave

 

I was wondering what ports do we need to allow the Aruba Instant and Airwave to communicate.

 

And what are the steps to accomplish this.

 

Thanks

 

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Guru Elite

Re: Configure Aruba Instant and Airwave

Port tcp 443



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Aruba Employee

Re: Configure Aruba Instant and Airwave

The configuration steps are outlined in Chapter 21 of the IAP 3.0 users guide (available on the Aruba support site).

Re: Configure Aruba Instant and Airwave

 

Forgot to mention that i would like to connect e1 of the IAP 135 to e1 of a RAP and create a trunk connection between these two.

 

Assigned an IP address to the virtual controller on the IAP of the trunk native VLAN(tunneling back through RAP) so we can reach it from our side.

 

Can this be done ?

 

 

Thanks

 

Vic

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: