Controllerless Networks

Reply

Controller HA Config

Community,

 

I have two Aruba 3200XM Controllers running version 6.4.4.11. I want to put these in an HA pair, but needed to know something. The active controller is up and running with 16 AP's registered. I want to configure the other controller as an inactive standby that only takes over should the primary fail or become unreachable. Do I configure the secondary controller exactly the same way as the primary? Including IP addresses for VLANs etc? 

 

Thanks.

Re: Controller HA Config

You can follow the instructions here to configure HA/Fast Failover
https://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Content/ArubaFrameStyles/VRRP/HighAvFastFailover.htm

Sent from Mail for Windows 10
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: Controller HA Config

Victor,

 

Thank you for the link. However, it doesnt provide any detail on how to confgure the standby controller. Should I mirror the config on the standby controller, including IP addresses and such? 

Re: Controller HA Config

When you build the HA profile you can add both controllers in dual mode

Then the LMS IP under the AP-Group > AP System determines which one will be set as the primary controller for that group of Aps

Sent from Mail for Windows 10
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: