Controllerless Networks

Reply
Frequent Contributor I

Disable Block Acknowledge

Hi!

 

We are troubleshooting what we precieve are client issues on a customer site and the devicevendor want to test to Disable Block Acknowledge.

 

Can´t find this in the GUI anywhere , we are using ariwave instant config.

I´ve read it´s posible to disable on controllerbased solutions. Is it possible to disable on instant based soultions ?

/Daniel
ACMP | ACCP | HP ATP - FlexNetwork Solutions
Frequent Contributor I

Re: Disable Block Acknowledge

From the cli

- configure

- wlan ssid-profile "your-profile"

- mpdu-agg-disable

 

HTH

Kevin

Frequent Contributor I

Re: Disable Block Acknowledge

Awesome thank you.

Do you know if the cluster will accept cli commands when running instant config under airwave ?

/Daniel
ACMP | ACCP | HP ATP - FlexNetwork Solutions
Frequent Contributor I

Re: Disable Block Acknowledge

I am not completely sure, but I think that this should be done in AirWave if the VC is in "Manage Read/Write" mode

 

HTH

Kevin

Frequent Contributor I

Re: Disable Block Acknowledge

I took some help from TAC.

Had to remove instant config GUI to apply cli commands. Then we ended up removing the commands since it didn't solve anything. And after that we re-enabled instant config gui.

Thanks for the tip. Would be nice to be able to do cli / custom config even if we use instant config gui mode.

/Daniel
ACMP | ACCP | HP ATP - FlexNetwork Solutions
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: