Controllerless Networks

Reply
Frequent Contributor I

Display VisualRF Floor Plan for Connected Client?

Hi, I have a demo setup:

Airwave server running 8.0.6.1

Two Instant APs running latest OS(one of th two is running as Virtual Controller)

 

I created floor plan inside VisualRF but doesnot seem to have option to display or associate with any clients/Group/Folder... I can export or create BOM within the Airwave VisualRF though.

 

Maybe there is some component I need?

 

Please advise.

Guru Elite

Re: Display VisualRF Floor Plan for Connected Client?

You have to Add Deployed APs as part of the floor plan:  http://www.arubanetworks.com/techdocs/AirWave_8_0_Web_Help/UserGuide.htm#AWUserGuide/Chapter9_VisualRF/Provisioning_Existing_Ac.htm#11visualrf_534422403_1019052

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Frequent Contributor I

Re: Display VisualRF Floor Plan for Connected Client?

Thanks, I added the AP in floor by selecting the model instead of add deployed AP.

 

Now the floor map shows under the Wireless network page, still not client page. I guess ARM needs sometime to do the calculation for each client?

Guru Elite

Re: Display VisualRF Floor Plan for Connected Client?

VisualRF needs to do calculations for each client, yes.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: