Controllerless Networks

Reply
New Contributor

Drop Connection in specific Area

 

 

Guru Elite

Re: Drop Connection in specific Area

Do you have a diagram of where the access points are?

Do you have a picture of any of the access points?

Are you using RF plan to see the coverage of the access points?

You probably know that the AP60 is a single-band access point that probably only operates on the 2.4ghz band.  It could be difficult to make a 2.4ghz only band AP work with high density. 

Band steering would not be useful, since the AP only offers a single band at a time.

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
New Contributor

Re: Drop Connection in specific Area

 

 

 

Guru Elite

Re: Drop Connection in specific Area

I don't have much information to understand what could be happening here...

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: