Controllerless Networks

last person joined: 23 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Dynamic ACL Roles via Radius / FreeRadius , Instant AP ?

This thread has been viewed 6 times

  • 1.  Dynamic ACL Roles via Radius / FreeRadius , Instant AP ?

    Posted Mar 30, 2015 02:33 PM

    Hi

     

    customer inquiry , dynamic ACL role when authenticating via radius, anyone built this already, e.g. with Instant APs ?  customer would like to modify acl's on Radius server, not on Aruba Instant or Controller , 

     

    Talked with some SE's they pointed to Radius VSA , but dont have further details, need some binary answer "yes this is working properly" . 

     

    thanks

    ben



  • 2.  RE: Dynamic ACL Roles via Radius / FreeRadius , Instant AP ?
    Best Answer

    EMPLOYEE
    Posted Mar 30, 2015 02:35 PM

    Downloadable roles/ACLs are currently only available in controllers.



  • 3.  RE: Dynamic ACL Roles via Radius / FreeRadius , Instant AP ?

    Posted Mar 31, 2015 06:04 AM

    sounds good, you ever built this , or is there some homebrew or some basic step by step information what/where to config , e.g. if doing a PoC for customer and let him test the aruba solution with controller/AP based.

     

    any homebrew documentation avail ?

     

     



  • 4.  RE: Dynamic ACL Roles via Radius / FreeRadius , Instant AP ?

    Posted Oct 23, 2015 01:33 PM

    Hi!

     

    But what about preconfigured roles on Instant? Can I send role name in ACCEPT message from the Radius and get it applied on the access point?



  • 5.  RE: Dynamic ACL Roles via Radius / FreeRadius , Instant AP ?

    EMPLOYEE
    Posted Oct 23, 2015 02:03 PM
    You need to import the Aruba radius dictionary and use the Aruba-User-Role VSA to send the value. 

    You can also use filter-ID but then you have to map everything on the VC. 


    Thanks, 
    Tim