Controllerless Networks

Reply
New Contributor

ESC+Ctrl+K

Hi,

 

should the key combination mentioned work on an IAP-207, IAP-305 or IAP-315 and recent firmware? I'm looking for the

halt

 command.

 

Guru Elite

Re: ESC+Ctrl+K

It exists on the console at the # prompt, but it is not supported.  You don't need "halt"....access points are designed to be rebooted or you can just cut power to them.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: