Controllerless Networks

Reply
New Contributor

Error after update firmware

Misters, I have this error after upgrade the firmware, the wiap 115, its reboot after some minutes after power on after shows is error.

 

To set s17 LOOKUP_CTRL_REG registers, flag 1
athr_gmac_dma_hang_check_timer:GMAC DMA hang is dectected,the irq count is constant.This count is 145,last count is 145

Enet:0 port0 up

Frequent Contributor I

Re: Error after update firmware

I had the same issue with three APs. A factory reset gets them back up, but the console still logs this:

 

athr_gmac_dma_hang_check_timer:GMAC DMA hang is dectected,the irq count is constant.This count is 53,last count is 53

 

As the AP now appears to work I'm assuming this is normal and can be disregarded. If anyone knows different.....

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: