Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

External - RADIUS authentication

This thread has been viewed 0 times

  • 1.  External - RADIUS authentication

    Posted May 14, 2014 07:34 AM

    I've been configuring up some Instants on code version 6.3.1.2-4.0.0.4_42384 and have noticed that the option, on a guest WLAN for external authentication using RADIUS as the splash page type is not available in the drop-down. Whats happened? I'm sure this option was there before.



  • 2.  RE: External - RADIUS authentication

    EMPLOYEE
    Posted May 14, 2014 08:58 AM

    Screenshot?



  • 3.  RE: External - RADIUS authentication
    Best Answer

    Posted May 14, 2014 09:03 AM

    I've poked around a bit further and it looks like this is now setup under Security>External Captive portal. Then added into the WLAN. In the Captive portal configuration do i need to use port 443?.



  • 4.  RE: External - RADIUS authentication

    EMPLOYEE
    Posted May 14, 2014 02:18 PM

    No - you don't need to use 443.  



  • 5.  RE: External - RADIUS authentication

    Posted May 16, 2014 03:14 AM
      |   view attached

    I cant complete the settings page without entering a port number.



  • 6.  RE: External - RADIUS authentication

    Posted May 28, 2014 09:04 AM

    What port number needs to be used on the External captive portal setup page?



  • 7.  RE: External - RADIUS authentication

    EMPLOYEE
    Posted May 28, 2014 09:06 AM
    Depends on the page. Usually 443 or 80


  • 8.  RE: External - RADIUS authentication

    Posted Jun 05, 2014 04:47 AM

    Looks to be working with 443.