Controllerless Networks

Reply
Super Contributor II

External - RADIUS authentication

I've been configuring up some Instants on code version 6.3.1.2-4.0.0.4_42384 and have noticed that the option, on a guest WLAN for external authentication using RADIUS as the splash page type is not available in the drop-down. Whats happened? I'm sure this option was there before.

Guru Elite

Re: External - RADIUS authentication

Screenshot?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Super Contributor II

Re: External - RADIUS authentication

I've poked around a bit further and it looks like this is now setup under Security>External Captive portal. Then added into the WLAN. In the Captive portal configuration do i need to use port 443?.

Re: External - RADIUS authentication

No - you don't need to use 443.  

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Super Contributor II

Re: External - RADIUS authentication

I cant complete the settings page without entering a port number.

Super Contributor II

Re: External - RADIUS authentication

What port number needs to be used on the External captive portal setup page?

Re: External - RADIUS authentication

Depends on the page. Usually 443 or 80
Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Super Contributor II

Re: External - RADIUS authentication

Looks to be working with 443.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: