Controllerless Networks

Reply
Frequent Contributor II
Posts: 107
Registered: ‎04-15-2013

Factory resetting an Instant AP 270, any suggestions?

Unsuccessful in resetting an Instant AP 270, any suggestions?

 

I have held the reset button down while powering on the device for 10 seconds with no success.

 

Thanks,

 

Brandon

 

 

Guru Elite
Posts: 21,272
Registered: ‎03-29-2007

Re: Factory resetting an Instant AP 270, any suggestions?

Did you try the specific instructions here:  http://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=1634

 

 

"Reset Button The reset button can be used to return the AP to factory default settings. To reset the AP: 1. Power off the AP. 2. Press and hold the reset button using a small, narrow object, such as a paperclip. 3. Power-on the AP without releasing the reset button. The system LED will flash within 5 seconds. 4. Release the reset button. The system LED will flash again within 15 seconds indicating that the reset is completed. The AP will now continue to boot with the factory default settings."

 

If that does not work, and you don't have a console cable, please contact TAC.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor II
Posts: 107
Registered: ‎04-15-2013

Re: Factory resetting an Instant AP 270, any suggestions?

I was able to get it reset.  We can close this out.

 

 

Frequent Contributor I
Posts: 69
Registered: ‎05-06-2013

Re: Factory resetting an Instant AP 270, any suggestions?

What did you end up doing to get it reset?


Deltr0nz wrote:

I was able to get it reset.  We can close this out.

 

 


 

Search Airheads
Showing results for 
Search instead for 
Did you mean: