Controllerless Networks

Reply
New Contributor

Re: Firmware update failing with "Received no response from server"

I had the same problem.

Solved in this way (correct NTP IP address)

Thanks alot!

New Contributor

Re: Firmware update failing with "Received no response from server"

I'm still getting the same error message "received no response from server" even after updating NTP server IP.

 

Any idea what is going on ?

 

My current firmware: 6.5.1.0-4.3.1.0_57768

 

Thanks.

Guru Elite

Re: Firmware update failing with "Received no response from server"

The clock in the logs must also be correct or from today, for you to know that NTP is working.  



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor

Re: Firmware update failing with "Received no response from server"

Thank you for prompt reply cjoseph.

I run few log reports and all of them shows correct timing, so I'm assuming that NTP works fine.

I'm using the following NTP : 

 

24.56.178.140wwv.nist.gov
New Contributor

Re: Firmware update failing with "Received no response from server"

Thank you for this.  This was my exact issue.  The time on the virtual controller was wrong even though all the APs were fine.  Fixed that and the update is here.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: