Controllerless Networks

Reply
Occasional Contributor II

Guest SSID with PSK and Role based bandwidth contract

Hi I am trying to setup my Guest SSID with a splash screen, with this I would like to trottle back the bandwidth of the users to 2 mbps up and downstream.

 

when I set the PSK on the security tab and then set the 2mbps on the access tab and add a rule under bandwidth contract.  All the settings wont save the role based/bandwith rule gowes back to unrestricted.

 

Am I missing something

 

Thanks for the replies

Guru Elite

Re: Guest SSID with PSK and Role based bandwidth contract

EDIT:  Instant AP



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II

Re: Guest SSID with PSK and Role based bandwidth contract

  1. So I goto Configuration> Access Control there is no user roles just unrestricted, Network based and role based. I went into role based and set the bandwidth but it wont keep the setting if I have encryption enabled, when I go back to Access it is back at unrestricted
Guru Elite

Re: Guest SSID with PSK and Role based bandwidth contract

.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II

Re: Guest SSID with PSK and Role based bandwidth contract

We created a new user role called guest and then under the Bandwidth Contracts tab we set bandwidth limits.  Hope this helps

Occasional Contributor II

Re: Guest SSID with PSK and Role based bandwidth contract

  • OK we dont have an enforcement license installed

If I got to WLAN setting and advanced options there is an area for bandwidth Limits do I need the enforcement License for that and will that give me what I need

 

Thanks

Guru Elite

Re: Guest SSID with PSK and Role based bandwidth contract

.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Aruba Employee

Re: Guest SSID with PSK and Role based bandwidth contract

I just tested it on IAP running 6.5.4.4. Yes the knob goes back to unrestricted, however if you move it back to Role based, & click on the role, you would see the bandwidth contract in place.

 

If you SSH into IAP and do a show run, you can see something like:

 

wlan access-rule "SSID1"
index 3
rule any any match any any any permit
bandwidth-limit downstream 4
bandwidth-limit upstream 2

 

So definitely the config is getting saved, atleast on the latest version.

 

But why did the slider move back to unrestricted?

I will get a bug filed for it.

Occasional Contributor II

Re: Guest SSID with PSK and Role based bandwidth contract

Yes it is there, thank you

 

  •  rule any any match any any any permit
     bandwidth-limit peruser downstream 2048
     bandwidth-limit peruser upstream 2048
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: