Controllerless Networks

Reply
Contributor I

Guest time range on IAP

Hello,

 

Is it possible to create a specific time for Guest users on IAP local database? (example: Specific Guest session will terminate after 30min).

 

Thanks

 

Re: Guest time range on IAP

Hey, there is no way to set an expirey time on a Guest account. You would need a 3rd party db such as Clearpass for this. You can however set a Inactivity timeout (Under the SSID wizard ) Specify an interval for session timeout in seconds, minutes or hours. If a client session is inactive for the specified duration, the session expires and the users are required to log in again. You can specify a value within the range of 60-86400 seconds or up to 24 hours for a client session. The default value is 1000 seconds.


ACMA, ACMP
If my post addresses your query, give kudos:)
Contributor I

Re: Guest time range on IAP

Thank you Zalion

Re: Guest time range on IAP

No , the time range instant will apply to all users (SSID level)

Do you have ClearPass? With ClearPass policy manager you can do this

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: