Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

How I can configure one rule for destination Nat in IAP?

This thread has been viewed 2 times

  • 1.  How I can configure one rule for destination Nat in IAP?

    Posted Feb 22, 2013 04:01 AM

    I need to send to external proxy all http traffic. In ARUBAOS for controller is simple, but not how the IAPs. Thanks



  • 2.  RE: How I can configure one rule for destination Nat in IAP?
    Best Answer

    Posted Feb 22, 2013 04:14 AM

    hi.

     

    as far as i aware its not supported using InstantAP.

    This is not possible on Aruba Instant and would probably have to be done on the upstream router (branch most likely).

     



  • 3.  RE: How I can configure one rule for destination Nat in IAP?



  • 4.  RE: How I can configure one rule for destination Nat in IAP?

    Posted Feb 22, 2013 07:49 AM

    Have you tried using the Destination-NAT action within the policy rules?  Is this what you are trying to do?

     

    instant-dst-nat.jpg



  • 5.  RE: How I can configure one rule for destination Nat in IAP?

    Posted Mar 08, 2013 04:46 PM

    I don't see destination NAT in the action tab, what software/license level are you on?



  • 6.  RE: How I can configure one rule for destination Nat in IAP?

    MVP EXPERT
    Posted Mar 14, 2013 05:38 PM

    It is present in the latest release :)



  • 7.  RE: How I can configure one rule for destination Nat in IAP?

    Posted Oct 16, 2014 03:37 AM

    Hi All,

     

    Did this ever get resolved. I have a cusotmer trying to do the same thing; redirect HTTP traffic on an SSID to a proxy server on port 9090. We tried the config above but it does not work.