Controllerless Networks

last person joined: 12 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

This thread has been viewed 1 times

  • 1.  How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    Posted Dec 15, 2015 09:29 PM

    How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

     

    I haven't the link "New" in the AP list on the WEB instant cluster interface.



  • 2.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    EMPLOYEE
    Posted Dec 15, 2015 10:22 PM

    Hi, 

     

    Enable "Auto Join Mode" in the System tab - Advanced options. You'll see the "New" link only when the auto join is disabled. 

     

    Thanks, 

    Rajaguru Vincent 



  • 3.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    Posted Dec 16, 2015 12:40 AM
      |   view attached

    Thanks you

     

    but i haven't this option in system/Advanced Option.

     

     



  • 4.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    EMPLOYEE
    Posted Dec 16, 2015 06:41 AM

    AdminSarg,

     

    4.0.0.5 is an older version of code.  If you are running older IAPs on that code and you want newer IAPs to join, they may not support that version of code and will not join.  What IAP model do you have now, and what IAP model do you want to join your existing cluster?



  • 5.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    Posted Dec 16, 2015 07:34 AM

    Thank you

     

    it's an IAP225 i want to join to an IAP 270 master (alone in the cluster).

    I try on APBOOT setenv master but it doesn't force the IAP 225 to become the slave.

    On the VC I use allowed-new-ap an allowed-ap with the mac-address of the slave.

    but the slave allways show INIT---> Master on boot .

     

    And I can't download new firmware because I wait my ARUBA support account validation. 

     

     



  • 6.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    EMPLOYEE
    Posted Dec 16, 2015 07:41 AM

    AdminSarg,

     

    The Minimum version of code for the IAP- 277 is 4.2 and for the 274 and 275 is 4.1  http://www.arubanetworks.com/assets/ds/DS_AP270Series.pdf

    The minimum version of code for the  IAP-225 is instant 4.0 http://www.arubanetworks.com/assets/ds/DS_AP220Series.pdf

     

    The question is, do you have a 277, a 274 or a 275? That will determine if you need 4.1 or 4.2 across the board to support your access points...  4.0 will only support your IAP-225..

     

     



  • 7.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    Posted Dec 16, 2015 08:33 AM

    I have an ArubaOS (MODEL: 274), Version 6.4.0.2-4.1.0.0 

     

    and an ArubaOS (MODEL: 225), Version 6.3.1.4-4.0.0.5

     

    should i upgrade my 225 to 4.1 version ?

     

    or it will be better to upgrade all to 4.2 version ?

     

     

     



  • 8.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    EMPLOYEE
    Posted Dec 16, 2015 09:18 AM

    The latest 4.1, 4.1.1.10 should be the minimum.  Let me know if you need that version of code for the 225 and the 274.

     



  • 9.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    Posted Dec 17, 2015 01:28 PM
    4.1.1.11 is out as well


  • 10.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    Posted Dec 22, 2015 11:45 PM

    HI

     

    I find the origin of my trouble, i need to convert all of my IAP on Defaut Virtual Controler mode.

    If i don't they can't introduce the VC.

     

    thanks you for your help

     



  • 11.  RE: How can I had a new AP to an existant cluster (6.3.1.4-4.0.0.5_43022) without "new" option ?

    Posted Dec 23, 2015 07:45 AM
    Do you have auto join enabled?

    Are they on the same layer-2 network??