06-12-2014 02:57 PM
From the spec-sheet here: (http://www.arubanetworks.com/pdf/products/ap-ant-15_ss.pdf)
It looks like you screw it to the side of one building pointed more-or-less toward the other.
Isn't 120degrees a little wide for a poit to point link? Or are you hoping to serve mobile clients in the region between buildings as well?
if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
06-13-2014 12:37 AM
Depending on what AP you are connecting to and distance you might look at an antenna with higher gain such as the ANT-2x2-5314. This is a 30deg antenna and 14dBi gain. This has a narrow focus so it does not "hear" as much noise from the environment. Keep the connector types in mind. Outdoor antennas will have Type-N connectors, as do our outdoor APs where indoor APs use RP-SMA connectors so you need an adaptor.
For a complete list of our supported antennas please click ~here~ . This matrix shows a photo of the antenna, gain, antenna pattern, and the connector type.