Controllerless Networks

Reply
New Contributor

How to change AP from Spectrum to Access Mode in Instant/AirWave

I have an access point that somehow got into spectrum mode.  I don't seem to be able to change the AP back to access mode. 

 

I am attempting to do this by going into instant config in Airwave.> Go to Access Point > Select the access point that is in spectrum mode > click on the radio tab > change mode from spectrum to access > save and apply. I have also done this and rebooted the access point after.

 

I can't get it to change roles.  Am I doing something wrong or am I having an issue with the AP and I need to completely reset it?

 

Thanks,

Peter

Re: How to change AP from Spectrum to Access Mode in Instant/AirWave

Sounds like you're doing the right thing but it'snot working. I'd recommend calling TAC if you want to investigate.

 

Cheers

James

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216 | AMFX #11
---------------------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: