Controllerless Networks

Reply
Occasional Contributor II

How to configure AP-367 to run on Aruba Instant?

Hi,

 

We have 2pcs AP-367 devices. Both the website and informational pdfs said it can run with Instant OS. The device came with a piece of paper that says it can run with Instant OS. The document says refer to Aruba Instant User Guide. In which I cannot find the proper chapter or topic where this process is discussed. Please advise! Thank you!

Re: How to configure AP-367 to run on Aruba Instant?

The actual Instant code is not release yet, so you would need to get it first. From there, you would stand up the UAP (AP-367) on a vlan that doesn't have a controller, no other IAPs, and a network that doesn't have DHCP option 43/60 or a dns entry for aruba-master (if your site has a controller). Once it comes up and doesn't find an instant cluster and no controller, it will broadcast a provisioning SSID. You can connect to that and then upload the IAP code. 

 

What region are you in (country, region/state, area, etc) and I can loop in your local account team to help you since you got some product before the code was released (you can IM it to me if you need to). Thanks

Jerrod Howard
Sr. Techical Marketing Engineer
Occasional Contributor II

Re: How to configure AP-367 to run on Aruba Instant?

Hi,

 

I'm in Hungary, Europe. 

Please link me to the support, because I will need the Instant OS on our 367s. Do you need any other details? Thank you!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: