Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

How to create a new virtual controller

This thread has been viewed 12 times

  • 1.  How to create a new virtual controller

    Posted Oct 04, 2017 10:58 AM

    Hi everybody,

     

    We have one virtual controller and 13 AP92 behind it.

    We are in 2.4 Ghz, but we also need to create a  5 Ghz wifi.

    As I know, Ap 92 can work in 2.4 or 5, but not in the two RF in same time.

    Is anybody can explain how to put some AP92 in 2.4 and others in 5.

    I think it's necessary to create a new virtual controller?

     

    Thanks in advance.

     

    PML.



  • 2.  RE: How to create a new virtual controller

    Posted Oct 05, 2017 02:53 PM

    No need to (and no way to) make a new VC in the same cluster.

    Rather than running two whole clusters, I'd just use the AP-specific configuration to turn off the radios you don't want used.

    There may well be a better way to do this, but here's my first thought:

    In the AP section of the GUI, click on an AP and click on the "edit" menu to put one radio in access and the other in monitor.

     



  • 3.  RE: How to create a new virtual controller

    Posted Oct 06, 2017 03:33 AM

    Hi,

    Good answer.

     

    Thanks a lot