Controllerless Networks

Reply
New Contributor

How to integrate an AP205 with an existing mesh network

I have an AP205 that I am trying to join to my existing mesh network, but the AP will never come back up once I have initially provisioned it. I am convinced that it is related to a setting in my controller but I am not sure what needs to be adjusted. The controller is running ArubaOS 6.4.3.4, and the AP is a converted IAP.

Re: How to integrate an AP205 with an existing mesh network

The existing the mesh setup is configured through the Aruba Controller ?

If it is then the new AP needs to be converted back to Campus AP and then in the controller you need make it a Mesh Point if you already have a Mesh Portal.

But you need to make sure that both APs are in line of sight so they can form the Mesh link
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: