Greetings!
I'm sure this question has been asked before, but I haven't been able to find anything that applied to our particular circumstances, so here goes. My apologies if this is a duplication.
I work for a school district. We have 40 IAP clusters, one at each school site (39 schools) and one at our District Office. Each site has its own router and subnet. Each IAP cluster is configured and is currently in Monitor/Firmware Upgrade-only mode in Airwave.
I have, so far, not been able to figure out how to manage the configurations properly with Airwave. I know how to change the IAP clusters to Read-Write mode, but haven't been able to figure out the rest. Right now, whenever I want to make a change, such as to a firewall rule, I have to do it 40 times. And then, I get 40 mismatches in Airwave, so I have to go to each VC, Audit, then import the template into Airwave again, then the mismatches go away. I know there's a better way to do this.
It seems that each site's template has the same name, but I'm guessing that within Airwave, each one is really unique. Would someone be willing to give me a step-by-step procedure on how I should do what I want to do, so that when I want to make a configuration change, I just change a template and let that push out to all 40 sites?
Also, most of our sites have the same SSID configuration and whatnot; however, there are 2 sites that each have an additional SSID. Will I be able to retain this extra configuration while still using a template?
Thanks!